Fix Blue Screen error with 3 Solution

How to fix blue screen error ?

SOLUTION 1:
                                                                          Fig: Blue Screen

    
PROBLEM--->  RAM

1. Blue screen error is one of the major error. It's something little difficult to solve this problem.
2. If the error appears once on the window then your system will get hang.
3. After that there is no response from keyboard so only the way to shut down the system is to hold the power button of your system. Your system will get shut down after few seconds.
4. This problem will come due to some problem in RAM.
5. You have to change the RAM then Check it whether the error again appears or not.
6. If the problem exist after changing the RAM then GOTO SOL2.

(Note: You have to change the RAM only the screen appears during the booting(Windows Loading) process.)

SOLUTION 2:

PROBLEM---> Hard Disk


1. The error may appear due to bad sectors in Hard disk.
2. In this case, suddenly the blue screen occurs while you are working normally with the system.
3. We can solve the problem either by repair hard disk or replace the hard disk.

Repair the bad sector by Command Prompt:

1. Type "cmd" in Run.
2. In command prompt, execute the following commands one by one.
3. First type "chkdsk c: /f" to fix the error in HDD.
4. After that type "chkdsk c: /r" to repair bad sectors in HDD.
5. Finally you have to restart the system then your problem will solved.


SOLUTION 3:

PROBLEM---> Add on Cards


1. This error also may appears due to "Add on Cards" which is newly added to your system.
2. You have to remove the card from PCI slot then restart your system. The system will proper.
3. If the problem solved then replace the new LAN card.
4. If the problem exist after the replacement of new LAN card, Your system doesn't support the device.
5. Remove all Add on cards which is connected to your system.